1R-MC

Curved, super torque, pulls strong to about 5000 RPM, three stages, muffler end (L). (.775 ID 17.75" IL)

Price: $31.75

AR-MC

Curved, broad power band above 5000 RPM, three stages, muffler end (XL). (.902 ID 17.25" IL)

Price: $31.75

(Click image for full size photo)

FB-VM

Curved, VENTURI PIPE, broad power band, two stages, muffler end (XL). (1.150 ID 17.00" IL)

Price: $39.75

Tech: Venturi pipes usually will add a second powerband when setup correct.

1T-MC

Curved, broad power band, four stages, muffler end (XL). (.902 ID 15.00" IL)

Price: $31.75

1T-MCX

Curved, mid and top end for large restrictor plates, good bottom and mid range for stockers, four stages, muffler end (XL). (.930 ID 15.00" IL)

Price: $34.75

1T-MCXX

Curved, broad power band, four stages, muffler end (XL). (.960 ID 15.00" IL)

Price: $34.75

SQ-FL

Curved, square, strong acceleration for tight tracks, muffler end (XL). (.960 ID 15" IL)

Price: $42.75

Tech: Square pipes are acceleration pipes, good for tight tracks.

99-V

Curved, VENTURI PIPE, shows one to two tenths power increase along entire power band in our testing, three stages. (.960 ID 14.75" IL)

99-V:	flat washer end	$42.75
99-VM:	muffler end (XL)	$39.75

Tech: Venturi pipes usually will add a second powerband when setup correct.

2000-V

Curved over the tank eliminating hot shoulder problems, VENTURI PIPE, shows one to two tenths power increase along entire powerband in our testing, three stages. (.960 ID 14.75" IL)

2000-V:	flat washer end	$42.75
2000-VM:	muffler end (XL)	$39.75

Tech: Venturi pipes usually will add a second powerband when setup correct.

96-C

Straight, good bottom and top end for fast ramp cams, two stages, flared end. (1.025 ID 16.50" IL)

Price: $38.75

98-MC

Curved, strong bottom, mid-range, and top end power, four stages, muffler end (XL). (.960 ID 14.00" IL)

Price: $31.75

LM-V

Straight, VENTURI PIPE, broad power band, strong top end power, three stages, flat washer end, fits best with angled intake. (1.025 ID 15.00" IL)

Price: $42.75

Tech: Venturi pipes usually will add a second powerband when setup correct.

LM-VMC

Curved, VENTURI PIPE, broad power band, four stages, muffler end (MO), specify if engine is on a FLAT or ANGLED motor mount. (1.025 ID 13.75" IL)

Price: $39.75

Tech: Venturi pipes usually will add a second powerband when setup correct.

LM-M

Straight, four stages, muffler end (XL or MO).
(1.025 ID 10.75" IL)

Price: $31.75

LM-MC

Curved, for Superstock, Limited Modified, Stock Heavy, and Super Heavy, four stages, muffler end (XL or MO), specify if engine in on a FLAT or ANGLE motor mount. (1.025 ID 16.50" IL)

Price: $34.75

LM-R

Straight for extreme RPM conditions, three stages.
(.960 ID 12.75" IL)

LM-R:	flat washer end	$31.75
LM-R-F:	flared end	$41.75

 

LM-T

Straight, good torque for 8200-9200 RPM, three stages.
(.960 ID 13.75" IL)

LM-T:	flat washer end	$31.75
LM-T-F:	flared end	$41.75

 

LM-T-S

Straight, broad application for fast ramp cams, three stages. (1.025 ID 13.50" IL)

LM-T-S:	flat washer end	$31.75
LM-T-S-F:	flared end	$41.75

 

3-S

Straight, super torque pipe, good for the larger restrictor plates and for stock engines requiring extra torque (gas and heavy classes, stock Jr. dragsters, tight track, indoor racing, etc.), two stages. (.902 ID 15.50" IL)

3-S:	flat washer end	$25.75
3-S-F:	flared end	$35.75

 

MW-F

Straight, pulls hard on the bottom and on top, works well on unrestricted engines in areas of high humidity, five stages, flared end. (.960 ID 17.50" IL)

Price: $48.75

98-S

Curved, very strong power band, three stages, flat washer end. (.960 ID 14.75" IL)

Price: $31.75

OP-M

Straight, for big valve engines, peak RPM drops about 400 RPM, but gains major increase in bottom end torque, will not build excessive heat, two stages, muffler end (MO).
(1.025 ID 8.75" IL)

Price: $31.75

OP-R

Straight, rev pipe, two stages. (1.025 ID 13.00" IL)

OP-R:	flat washer end	$31.75
OP-R-F:	flared end	$41.75

OP-T

Straight, torque pipe, recommended for tight tracks, stock appearing (big valves), and Briggs modified, two stages.
(1.025 ID 13.75" IL)

OP-T:	flat washer end	$31.75
OP-T-F:	flared end	$41.75

V-Loop

Venturi loop pipe, mid-range and top-end power, two power bands with venturi. (1.025 ID 34.75" IL)

Price: $57.75

Tech: Venturi pipes usually will add a second powerband when setup correct.